Misunderstandings in the operation of flatbed printer nozzles

　　1. Power supply

　　During the use of flatbed printers, staff usually disassemble, install, and clean the nozzle without turning off the power, which is a serious mistake. Loading and unloading the nozzle without turning off the power can cause varying degrees of damage to the components of the system, affecting the printing effect. In addition, when cleaning the nozzle, it is also necessary to turn off the power first and be careful not to let water touch the circuit board and other internal systems to avoid damage to the parts.

　　2. Cleaning method

　　The nozzle is a sensitive component in flatbed printers. In daily work, the cleaning of the nozzle should not be taken lightly. High pressure guns should not be used to clean the nozzle, as it may cause damage to the nozzle; It should also be noted that excessive cleaning of the nozzle is not allowed, as cleaning solutions are slightly corrosive. If used excessively, it can cause corrosion and damage to the nozzle. Some people also use ultrasonic cleaning, which can achieve a very clean effect, but it can also have adverse effects on the nozzle. If the nozzle is not severely clogged, it is recommended not to use ultrasonic cleaning to clean the nozzle.

　　3. Unreasonable use of external force

　　When adjusting the position of the nozzle, sometimes the staff may cause damage to the nozzle due to insufficient force. So when using the flatbed printer, especially when adjusting the nozzle position, the staff should remember not to use brute force to adjust the nozzle, but to grasp the force.

　　4. Ink

　　Flat panel printers have very strict requirements for the ink they use, and cannot use different types of ink at will, or use low-quality ink and cleaning solutions. Simultaneous use of different types of ink can result in color differences in the printing effect; However, using low-quality ink can cause clogging of the nozzle, and poor cleaning solution may corrode the nozzle. Therefore, when choosing ink, everyone should follow the manufacturer's advice and pay more attention to the ink.

Read recommendations:

Handheld thermal printer

Why are printer nozzles so expensive?